一、简介Introduction
1. 采用精密步进电机及其驱动器送线，电线长度、剥皮长度无偏差；
2. 采用台湾亚德客气动组件，稳定、高效、耐用；
3. 采用真彩触摸屏，操作简易；
4. 采用台湾金器导轨，TBI丝杆,精准,稳定、耐用；
5. 采用RIKO检测组件，精准、稳定。
6. 能够通过触摸屏设定相应参数即可调整：是否全剥皮、是否半剥皮、电线长度、剥皮长度、切口深度,速度
7. 送线装置采用两组四轮送线，稳定，精准，电线无压痕；
8. 压着装置采用万能静音端子机，噪音低、性能稳定，可搭载横、直送卡模。
 
1. The precision stepping motor and its driver are used to send the wire, and the wire length and stripping length have no deviation.
2. The use of Taiwan AirTAC dynamic components, stable, efficient and durable.
3. True color touch screen, easy to operate.
4. Adopt Taiwan MINDMAN guide rail, TBI screw, accurate, stable and durable;.
5. RIKO detection module, accurate and stable.
6. The corresponding parameters can be set through the touch screen to adjust: whether full stripping, whether half stripping, wire cutting length, stripping length, cutting depth, speed
7. Wire feeding device adopts two groups of four-wheel wire feeding, which is stable, accurate and free of indentation.
8. The crimping device adopts mute terminal machine, with low noise and stable performance, and can be equipped with horizontal and vertical molds.
 
二、参数Parameter

功能 Function	电线尺寸切断、两端剥皮、单端半剥皮、单线单端压着、双线并打压着、双线单端压着、自动设定切口深度、自动设定端子压着位置 Wire cutting,double ends stripping,single end half stripping,single wire and single end crimping,double wires crimping,double wire single end crimping,automatic setting incision depth, automatic setting terminal crimp position
电源Power supply	AC220V/110V  50/60HZ(单相/Single phase)
气压 Air pressure	0.4Mpa-0.6Mpa（需使用清洁干燥气体） (use clean and dry air)
适用线径 Wire process range	AWG24-AWG18
切断长度 Cutting length	35-9999MM
剥皮长度 Stripping length	前端：1.00-6.0mm半剥皮长度：2.0-6.0mm Head:1.00-600mm  Half stripping length:2.0-6.0mm
	后端：1.00-128.0mm半剥皮长度：2.0-12.0mm Tail:1.00-128.0mm   Half stripping length:2.0-12.0mm
较大线宽 Max wire width	35mm
切断精度 Cutting accuracy	0.2mm士0.002*L（切断长度/Cutting length）
压着力 Crimping ability	标准2吨（可订3吨） Standard 2T (3 T can be customized)
生产率 Speed	1800条/时 1800 pcs/h
重  量 Weight	250kg
外形尺寸 Dimension	750*620*1900(mm)
检测装置 Detector	有无电线检测、电线打结检测、压着端子检测空气压力检测 Wire exists or not,wire tie knot or not, terminal crimp exists or not and pressure detection