一、产品特点Features

1. 产品采用日本三菱伺服电机，精确、高效、稳定
2. 采用触摸屏数控方式调整

1. The product adopts Mitsubishi servo motor, which is precise, efficient and stable
2. Adopt touch screen CNC mode for adjustment
 
 
二、参数Parameter

功能 Function	单端剥皮,双端剥皮,单端压着,单端扭线,单端沾锡 Single end stripping,double ends stripping,single end crimping,single end twisting,single end tinning
电   源 Power supply	AC180V~242V 50/60HZ(单相/Single phase)
通用线径 Wire process range	AWG32-AWG20
切断长度 Cutting length	8mm-3500mm（依线材而定/Depend on the wire）
剥皮长度 Stripping length	0-15mm
切断誤差 Cutting accuracy	0.2mm士0.002*L（切断长度/Cutting length）
扭线长度 Twisting length	3mm-10mm
沾锡长度 Tinning length	0.5mm-10mm
压着能力 Crimping ability	标准2吨（可订3吨） Standard 2T (3 T can be customized)
气压 Air pressure	0.5-0.6Mpa(需使用清洁干燥气体） (use clean and dry air)
重量 Weight	350kg
尺   寸 Dimension	1280*680*1300(mm)
辅助裝置 Auxiliary device	同步預送线裝置、端子废纸收卷裝置 Synchronous prefeed wire device, terminal waste paper winding device
检测裝置 Detector	气压低下、电线有无、端子有无、剥皮异常、压着异常、入线异常 Wire exists or not,terminal exists or not,wire tie knot or not,terminal crimp exists or not,abnormal stripping and low pressure detection