一、特点Features

特点Features
1.能够自动吸线皮、端子碎料，不用工人浪费时间去清理。
2.通过日本进口电动机的多样化与部件小型化、机构集成化，告别了低端端子机大机械噪音与大耗气量；
3.由于是三菱伺服控制，此款不像一般的自动端子机，需运行完成整个动作才能停止，LSN-2803-HT调机时可以分解并自由变换每个动作，节省调机时间与线材端子的浪费。
4.本机采用日本三菱伺服控制与驱动,结构精简，保证动作精度的稳定与调机的方便。
5.人性化设计——三菱控制屏，提供丰富快捷的人机交流界面，大大地缩短员工上岗培训时间。

1. Able to automatically absorb wire and terminal scrap, without waste of workers' time to clean up.
2. Through the diversification of electric motors imported from Japan, miniaturization of components and integration of mechanism, we bid farewell to the large mechanical noise and large gas consumption of low-end terminal machines.
3. As it is controlled by Mitsubishi servo, this model is not like ordinary automatic terminal machine, which can only stop after the whole operation is completed. When LSN-2803-HT tuner is running, it can decompose and freely transform each action, saving tuner time and waste of wire terminals.
4. This machine adopts Mitsubishi servo control and drive, with simplified structure, ensuring stability of action accuracy and convenience of adjustment.
5. Humanized design - Mitsubishi control screen provides rich and fast human-machine communication interface, greatly reducing the time of staff training.




参数Parameter

功能 Function	双头自动裁线剥皮打端子穿护套一体、电线定长切断、两端压着 Double head automatic wire cutting, stripping,terminal crimping and sleeves insertion.Wire cutting and terminal crimping
电 源 Power supply	AC220V/110V  50/60HZ(单相/Single phase)
气压 Air pressure	0.5-0.6Mpa(需使用清洁干燥气体） (use clean and dry air)
压 着 力 Crimping ability	标准2吨（可订3吨） Standard 2T (3 T can be customized)
控制方式 Control mode	PLC 控制 PLC control
端子模具 Terminal mold	OTP 卡式通用模等模具 OTP universal mode and other mold
生产率 Speed	1700pcs/小时（最短切线时）依照线材而定 1700psc/h (The shortest cutting length) Depend on the wire
适用线材 Wire process range	AWG24~AWG14（可定做Special wire can be customized) 电线外径/Wire OD:1.6mm-3.6mm
端子范围 Terminal range	所有连续端子（盘式端子） All continuous terminals (disc terminals)
裁线范围 Cutting length	80m~3000mm 标准/Standard（800mm以上需装配送输送带/Conveyor belt shall be installed above 800mm）
裁线精度 Cutting accuracy	0.2mm士0.002*L（切断长度/Cutting length）
剥皮范围 Stripping range	前侧 1-10mm    后侧 1-17mm依线材而定 Head:1-10mm    Tail: 1-17mm Depend on the wire
尺 寸Dimension	1820W*960D*1860H(mm）
检测装置 Detector	检出气压低、剥皮、压端子检测、送料故障、排出不良所有停机异常，都会显示在屏幕上；可根据客户要求加装放线架与压力管理装置 Detection of low pressure, stripping and crimping terminals detection, feed failure, bad discharge, all abnormal downtime will be displayed on the screen; according to customer requirements, the installation of wire racks and pressure management device.