全自动单头沾锡穿胶壳机LSN-2805-JK2
发布时间:2021-04-08 19:45 点击量:次
产品展示
内容概况:
参数 Parameter 名称 全自动单头沾锡穿胶壳机LSN-2805-JK2 功能Function 电线裁线、剥皮,一端剥皮搓线沾锡,另一端剥皮、打端子穿胶壳 Wire cuttingstrippingone end stripping twisting and tinningthe
一站式端子解决方案商
参数 Parameter 名称 全自动单头沾锡穿胶壳机LSN-2805-JK2 功能Function 电线裁线、剥皮,一端剥皮搓线沾锡,另一端剥皮、打端子穿胶壳 Wire cuttingstrippingone end stripping twisting and tinningthe
一站式端子解决方案商
联系客服
0512-57115729
一、特点 Features
1. 单头穿胶壳机可适用2P并线、两条电子线的单端沾锡、压接及穿壳加工。适用于1.25端子、2.0端子、2.5端子等。裁线长度25-450mm
2. 切线剥皮机构采用稳定可靠的结构。
3. 采用伺服端子机,省人工且保证质量稳定性。
4. 采用触摸式人机界面操作,调整方便、快捷。
5.穿胶壳拉力大小可根据线材大小设定力度,良品不良品可实现自动分类计数放置。
6.穿胶壳采用模块化结构,不同胶壳只需简单更换振动盘以及轨道、刀模即可。
7.操控机构采用人机界面参数化控制,可出具端子拉力曲线分析报告;搭载超高清视觉系统,能够实现对产品进行实时图像显示、对比、分析、压接不良时会发出警报并自动筛选出不良品
二、参数 Parameter
功能 Function |
电线裁线、剥皮,一端剥皮搓线沾锡,另一端剥皮、打端子穿胶壳 Wire cutting,stripping,one end stripping, twisting and tinning,the other end stripping,crimping terminal and housing inserting |
电源 Power |
AC220V/110V 50/60HZ(单相/Single phase) |
加工线径 Wire process range |
AWG18-AWG32 |
适合胶壳尺寸 Applicable plastic shell |
W16*D20*H20mm以下(端子间距1.25-3.96) |
切断长度 Cutting length |
25mm-450mm |
剥皮长度 Stripping length |
1.0-5.0mm |
沾锡长度 Tinning length |
1.0mm-5mm |
切断精度 Cutting accuracy |
0.2mm士0.002*L(L=切断长度/Cutting length) |
压着能力 Crimping ability |
标准2吨(可订3吨) Standard 2T (3 T can be customized) |
生产率 Speed |
2200孔/时 2200 holes/h |
气压 Air pressure |
0.5-0.7Mpa(需使用清洁干燥气体) (use clean and dry air) |
外型尺寸 Dimension |
L2100*W1200*H1580mm |
重量 Weight |
约1200kg |
检测装置 Detector |
线材缺线或打结、压着不良、端子穿入塑壳是否到位、气压检测、剥皮异常、胶壳有无、助焊剂有无、良率设定 Wire exists or not,wire tie knot or not,terminal through plastic shell or not,pressure test,abnormal stripping,plastic exists or not,flux exists or not,yield set. |
推荐产品MORE+
推荐新闻MORE+
- 线束全自动压端子机怎么修理 2022-03-23
- 新能源剥线机 2021-11-10
- 高精密私服压接机 2021-11-01
- 新能源电缆线自动裁线剥线机 2021-04-06
- 多芯插壳机 2021-03-31
- 全自动穿胶壳端子机 2021-03-29
- 新款全自动打端子穿胶壳端子机 2021-03-25
- 全自动穿胶壳机-自动打端穿胶壳机,单双 2021-03-24
- 全自动端子机参数怎么设置 2021-01-06
- 半自动五线高速线束端子机 2020-12-30