全自动单头防水栓端子机压着机LSN-2802E
发布时间:2021-04-08 11:58 点击量:次



产品展示
内容概况:
全自动防水栓端子机压着机(单头)视频介绍: 全自动防水栓端子机压着机(单头)产品说明: 一、 全自动防水栓端子机压着机 (单头)特点 1、集自动穿防水密封堵,自动裁线,剥
一站式端子解决方案商
全自动防水栓端子机压着机(单头)视频介绍: 全自动防水栓端子机压着机(单头)产品说明: 一、 全自动防水栓端子机压着机 (单头)特点 1、集自动穿防水密封堵,自动裁线,剥
一站式端子解决方案商
联系客服
13301558654
一.特点Features
1.采用光电传感技术对零件准缺定位; 采用定扭矩调整技术,自动控制紧固件的拧紧力矩; 产品性能自动检测、故障自动判定报警。
2.采用PLC控制,结合编码器,生产数据实时记录,可任意设定产品所需规格,功能多样化,适应范围广。
1. Adopt photoelectric sensing technology to locate the quasi-missing parts;Adopting constant torque adjusting technology, the tightening torque of fastener is automatically controlled.Product performance automatic detection, automatic fault detection and alarm.
2. PLC control, combined with encoder, real-time recording of production data, can set the required specifications of products arbitrarily, with diversified functions and wide range of adaptation.
全自动防水栓端子机压着机(单头)视频介绍:
1.采用光电传感技术对零件准缺定位; 采用定扭矩调整技术,自动控制紧固件的拧紧力矩; 产品性能自动检测、故障自动判定报警。
2.采用PLC控制,结合编码器,生产数据实时记录,可任意设定产品所需规格,功能多样化,适应范围广。
1. Adopt photoelectric sensing technology to locate the quasi-missing parts;Adopting constant torque adjusting technology, the tightening torque of fastener is automatically controlled.Product performance automatic detection, automatic fault detection and alarm.
2. PLC control, combined with encoder, real-time recording of production data, can set the required specifications of products arbitrarily, with diversified functions and wide range of adaptation.
全自动防水栓端子机压着机(单头)视频介绍:
二、参数Parameter
电源: Power supply |
AC220V/110V 50/60HZ(单相/Single phase) |
功能: Function |
电线切断、剥皮、单端扭线、单端穿防水栓、单端压着 Wire cutting striping,single end twisting,the other end crimping and waterproof insertion |
产能: Speed |
3500条/小时(长度100mm以内) 3500 pcs/h(Within 100mm) |
电线范围 Wire process range |
AWG28-AWG20 |
切断长度 Cutting length |
50mm-9999mm |
切断精度 Cutting accuracy |
0.2mm士0.002*L(切断长度/Cutting length) |
剥皮长度 Stripping length |
0.1mm--100mm |
压着能力 Crimping ability |
标准2吨(可订3吨) Standard 2T (3 T can be customized) |
气压 Air pressure |
0.5-0.6Mpa(需使用清洁干燥气体)) (use clean and dry air) |
机体尺寸 Dimension |
700W X 800L X 1500H(mm) |
机体重量 Weight |
约350kg |
检测装置 Detector |
电线有无检测、端子有无检测、防水栓有无检测、端子压着有无检测,堵线检测,气压低检测 Wire exists or not,terminal exists or not,waterproof exists or not,terminal crimp exists or not,blocking wire detection and low pressure detection |
推荐产品MORE+
推荐新闻MORE+
- 线束全自动压端子机怎么修理 2022-03-23
- 新能源剥线机 2021-11-10
- 高精密私服压接机 2021-11-01
- 新能源电缆线自动裁线剥线机 2021-04-06
- 多芯插壳机 2021-03-31
- 全自动穿胶壳端子机 2021-03-29
- 新款全自动打端子穿胶壳端子机 2021-03-25
- 全自动穿胶壳机-自动打端穿胶壳机,单双 2021-03-24
- 全自动端子机参数怎么设置 2021-01-06
- 半自动五线高速线束端子机 2020-12-30